Bundling printing process
1. Silkscreen: After printing, the impact has clear knocks. Since it is a layer of ink. The ordinary jug (tube shaped sort) of silk screen printing can be done in one printing. A one-time charge for other unpredictable pieces. Shading is additionally a one-time charge. Also it is separated into self-drying ink and UV ink. Oneself drying ink is not difficult to tumble off for quite a while and can be cleared off with liquor. UV ink has clear knocks to the touch and is hard to clear off.
2. Hot stepping: It is a slim layer of paper hot stepped on it. So there is no inward and arched sensation of silkscreen. Also hot-stepping is best not straightforwardly on the two materials PE and PP. It should be heat-moved first and afterward hot-stepped. Or on the other hand a decent hot stepping paper can likewise be hot stepped straightforwardly. Hot stepping isn’t permitted on aluminum plastic, yet hot stepping should be possible at max throttle.
3. Water move printing: It is an arbitrary printing process completed in the water. The printed surfaces are conflicting. What’s more costly.
4. Warm exchange printing: Thermal exchange printing is for the most part utilized for items with enormous amounts and complex printing. It has a place with joining a layer of film to the surface. Costly.
5. Counterbalance printing: for the most part utilized for aluminum-plastic hoses and every single plastic hose. Assuming the offset printing is a hued hose, you should utilize silk screen printing, and the offset printing will have the foundation shading appearing on the other side. Also now and again a layer of brilliant film or sub-film is connected to the outer layer of the hose.
All right printing process is finished
You can get to the home page https://www.ppmaterial.cn/
You can also go to our LinkedIn https://www.linkedin.com/company/plastic-packing-material