Structure And Application Of Emulsion Pump Lotion Pump B
Structure And Application Of Emulsion Pump Lotion Pump B
Structure And Application Of Emulsion Pump Lotion Pump.
For the same lotion pump, if used in container bottles with different neck heights,
the direction of the nozzle will be different. If the pump has a larger chamber (usually for high capacity pumps),
the pump may need to be primed before the product is delivered through the drive.
When used as intended, the pumps dispense the correct amount of product from time to time.
The commercial preparation of most emulsions involves the use of both a chemical emulsifier and a mechanical device
such as a colloid mill or in-line mixer to obtain a dispersed phase with a droplet size small enough to produce a finished product with the desired properties.
Emulsions are water-based, so they can be considered a lighter version of moisturizers.
This makes emulsions an easy alternative to traditional facial creams and oils that can make skin greasy and heavy.
Applying lotion under your moisturizer provides extra moisture without worrying about product buildup.
The unique structure of lotions means they can deliver the benefits of concentrated substances, making them more targeted than creams.
Not all is water, however: lotions contain essential oils and nutrients that help maintain the water-oil balance in the skin.
Water droplets dispersed in oil are called water-in-oil emulsions (without emulsions) and are used to isolate hydrophilic compounds.
Then, using a vacuum pump, water and oil are sucked into the emulsification tank.
The emulsifier tank is used to emulsify the products sucked from the oil tank and water tank. Usually,
the oil tank is used to dissolve some solid that the product can only be dissolved in oil,
then the dissolved solvent will be sucked into the emulsifier through soft tubes.
Structure And Application Of Emulsion Pump Lotion Pump B
The vacuum pump is connected by two hoses, one of which is connected to the water tank through a hose,
which acts as a seal when the pump is running; the other is connected to the main emulsion container through a pipeline and a gas-liquid separator
so that the pump can form the main emulsion under a vacuum container.
A pump is a mechanical device that releases the contents in a predetermined form according to the principle of vacuum and has sealing properties due to compression.
The bottle body is filled with lotion, and the lotion pump is connected with the bottle body through the bottle cap 3 to form products such as daily chemicals or medicines.
When the emulsion is delivered, neck 6 is screwed into cap 8 through the connecting ring 7 when the pump assembly 4 is located at the bottom of the pump chamber 2 .
While there are hundreds of different designs on the market today, the basics are the same,
and a crash course in one of these lotion pumps gives you an understanding of these components and how they affect the overall function of pumping product from the bottle into your hands.
These emulsion systems can be used to introduce hydrophobic active substances.
Multi-emulsion systems can also be developed, such as water-in-oil-in-water (without/or/a) and oil-water-in-oil (without/without) emulsions. A recent development is a microemulsion,
a special type of emulsion characterized by extremely small particle size, clarity,
and improved stability compared to conventional systems.
You will typically see emulsions in J-Beauty skincare products sold in dispensers or bottles due to their liquid consistency.
You can get to the home page https://www.ppmaterial.cn/
You can also go to our LinkedIn Plastic packaging material | 领英 (linkedin.com)